Hello!Welcome to Hubei BlueSky New Material INC.!
English | 中文版

【International Sales Office】
  Address:Room 2401,Tower B, Winner Plaza, No.100 Huangpudadao West Road, Tianhe District, Guangzhou,China
  Tel:+86-020-38856806
  Fax:+86-020-38856809
  E-mail:feng@blueskychemical.com

【Chinese Company Headquarters】
  Address:NO.8 Chemical Industry Park Economic Development Zone Xiantao,Hubei,China
  Tel:+86-0728-3254088
  Fax:+86-0728-3253808
  E-mail:feng@blueskychemical.com

·POSITION:ProductsGroupEpoxy → EPOXY SILANE OLIGOMER

EPOXY SILANE OLIGOMER

EPOXY SILANE OLIGOMER
  • Product Code:BOSIL-200
  • CAS No.:N.A
  • Effective Content:N.A
  • Appearance:Colorless or light yellow transparent liquid
  • Packaging:DRUM/IBC
  • Net Weight:200KG/950KG
Product Description

Product information

Product Code:BOSIL-200

Chemical Name: EPOXY SILANE OLIGOMER

 

Properties

◆ BOSIL-200 is colorless or light yellow transparent liquid, soluble in a variety of solvents.

 The epoxy silane oligomer can be diluted with appropriate solvent and used to prepare coatings, emulsions and other products.

 Suitable for epoxy resin alkyd phenolic resin acrylic resin nylon, as glass paint metal paint vulcanized silicone rubber adhesion.

 Enhances the electrical properties of epoxy based electronic sealants and packaging materials and printed circuit boards, which are produced by increasing the bonding strength between the resin and the matrix or filler.

 Effective against a wide range of fillers and substrates such as clay, talc, wollastonite, silica, quartz, or metals such as aluminum, copper, and iron.

 Modified water-based acrylic latex caulking and sealant, based on polyurethane and epoxy coatings.

 Low volatility, low VOC emission, easy to use, safe and environmental protection.


Technical data

1.png

Note: the above data are for reference only, can not be used as a technical specification

 

Application

Bosil-200 is widely used as quartz filled epoxy sealant, sand filled epoxy concrete patching material or coating, and metal filled epoxy mold material.Used in epoxy adhesives and sealants, to improve the adhesive properties of phenolic resin used for glass fiber reinforced epoxy resin ABS nylon PBT, etc., improve the resin and inorganic filler substrate bonding strength in order to improve its physical properties, especially mechanical strength of the composite waterproof electrical properties such as heat resistance performance, and have higher retention under wet state.Used for surface treatment of inorganic filler, the inorganic filler is clay talc silica aluminum powder iron powder hydroxide silica mica glass microbeads.

 

【Statement:】
  This product information, as well as all technical advice, is based on our current level of experience and knowledge. We do not accept any legal responsibility, including the known third party intellectual property rights. In particular, we do not make any guarantee or warranty of the product properties in a legal sense. We reserve the right to any changes to this product made by technological progress or further development. Customers who use this product should conduct their own careful testing and inspecting. This description of the product properties should also be verified by professional testing through the customers who use this product. The reference codes of other companies are not recommended but not excluded the availability of similar products.
  The guarantee from Hubei BlueSky is that the products ex BlueSky meets the sales specifications.
  The remediation for the breach of the warranty from Hubei BlueSky is limited to refund the payment or the replacement of product that does not subject to the warranty.
上一篇:γ-(2,3-EPOXY PROPOXY) PROPYL TRI METHOXY SILANE
下一篇:No more

Wechat

Wechat

Website

Website


Copyright © 2023 Hubei BlueSky New Material INC.
鄂ICP备05028071号 鄂公网安备 42900402000406号 网络经济主体信息湖北工商网监

 Home  Tel  Product
Trade
Hotline
+86-020-38856806
Head
Hotline
+86-020-38856809
WeiXin
Code
Wechat

Wechat

^
TOP